CAT Taper TG Milling Chuck
ChoneDe Precision CAT taper TG type collet chuck holders offer coolant capability. The holder default of dynamic balance standard ,G6.3 18000rpm. Precision dynamic balance G2.5 20000RPM and surface coating processing. and achieves T.I.R. of 0.0001" or better from taper to collet pocket. Each holder is Chongde certified for accuracy and balance and comes with a complete lab report.
We are specializing in the production of CAT TG Collet Chuck, we can to figure to sample processing, and perfect after-sales service and technical support. Looking forward to your cooperation!
Material: 20CrMnTi or JIS-SCM415
Hardness: 56-60HRC;
Collet size: TG100
Coolant thru capability
Taper precision ≤AT3
Features:
1. Material: 20CrMnTi or JIS-SCM415
2. Hardness: 56-60HRC;
3. Carburizing depth: ＞0.8；
4. Roughness： Ra＜0.4u；
6. Taper precision ≤AT3 and part of the standard size are tested by Diebold standard inspection tools which made in Germany;
7. Dynamic balance can do: G6.3 12000RPM , G2.5 20000~30000rpm；
8. Suitable for boring, milling, drilling, tapping, grinding, carving processing.
Our advantages
1. Good Rigidity
2. High accuracy stability of parts processing and surface processing dimension
3. Improving cutting tool using life
4. The wear of taper shank caused by vibration is reduced during heavy cutting
5. ATC repeats the operation with high accuracy
6. The appearance with nickel coating, the products are anti-rust, anti-corrosion and durability better.
4. Clean appearance and accuracy stable
5. -196℃ long cryogenic treatment and ultra long time thermal aging processing, reducing residual stresses and increasing the hardness and toughness.
Order No. | Model No. | L | L1 | D | d1 | T1 | T | KGS |
CD090401.3075070 | BT30-TG75-70 | 118.4 | 70 | 46 | 50 | M16*2.0P | TW1-1/2"-12 | 1.1 |
CD090401.3075100 | BT30-TG75-100 | 148.4 | 100 | 1.15 | ||||
CD090401.3010100 | BT30-TG100-100 | 148.4 | 100 | - | 60 | M24*2.0P | TW1-7/8"-12 | 1.2 |
CD090401.4010070 | BT40-TG100-70 | 135.4 | 70 | 63 | 1.2 | |||
CD090401.4010100 | BT40-TG100-100 | 165.4 | 100 | 1.3 | ||||
CD090401.4010120 | BT40-TG100-120 | 185.4 | 120 | 2.4 | ||||
CD090401.4015105 | BT40-TG150-105 | 170.4 | 105 | 82 | TW2-5/8"-12 | 2.7 | ||
CD090401.4015120 | BT40-TG150-120 | 185.4 | 120 | 2.9 | ||||
CD090401.4015135 | BT40-TG150-135 | 200.4 | 135 | 3.2 | ||||
CD090401.5010085 | BT50-TG100-85 | 186.8 | 85 | 100 | 60 | TW1-7/8"-12 | 3.4 | |
CD090401.5010100 | BT50-TG100-100 | 201.8 | 100 | 4.4 | ||||
CD090401.5010120 | BT50-TG100-120 | 221.8 | 120 | 5.1 | ||||
CD090401.5015090 | BT50-TG150-90 | 191.8 | 90 | 82 | TW2-5/8"-12 | 5.7 | ||
CD090401.5015105 | BT50-TG150-105 | 206.8 | 105 | 6.1 | ||||
CD090401.5015120 | BT50-TG150-120 | 221.8 | 120 | 6.5 |
Order No. | Model No. | L | L1 | D | d1 | T1 | T | KGS |
CD090401.4075070 | CAT40-TG75-2.75" | 5.437" | 2.75" | 2.5" | 1.968" | M16*2P | TW1-1/2"-12 | 1.2 |
CD090401.4075102 | CAT40-TG75-4" | 6.687" | 4" | 1.4 | ||||
CD090401.4075127 | CAT40-TG75-5" | 7.687" | 5" | 1.6 | ||||
CD090401.4010076 | CAT40-TG100-3" | 5.687" | 3" | 2.362" | TW1-7/8"-12 | 1.2 | ||
CD090401.4010102 | CAT40-TG100-4" | 6.687" | 4" | 1.4 | ||||
CD090401.4010152 | CAT40-TG100-6" | 8.687" | 6" | 2.55 | ||||
CD090401.4015127 | CAT40-TG150-5" | 7.687" | 5" | 3.228" | TW2-5/8"-12 | 2.9 | ||
CD090401.4015152 | CAT40-TG150-6" | 8.687" | 6" | 3.7 | ||||
CD090401.5010076 | CAT50-TG100-3" | 7" | 3" | 3.875" | 2.362" | M24*3P | TW1-7/8"-12 | 3.25 |
CD090401.5010102 | CAT50-TG100-4" | 8" | 4" | 4.4 | ||||
CD090401.5010152 | CAT50-TG100-6" | 10" | 6" | 5.3 | ||||
CD090401.5015127 | CAT50-TG150-5" | 9" | 5" | 3.228" | TW2-5/8"-12 | 5.7 | ||
CD090401.5015152 | CAT50-TG150-6" | 10" | 6" | 6.1 | ||||
CD090401.5015178 | CAT50-TG150-7" | 11" | 7" | 6.5 |