The ChongDe’s Hydraulic Chuck has strong torque power up to 550Nm, using for rough milling, boring, drilling, reaming, boring, chamfering, thread-milling including finish milling. Normally, the hydraulic chuck is for finish milling, but there is no many customer want to use hydraulic chuck with advantage of the hydraulic chucks for rough milling.
ChongDe’s hydraulic chuck allows the use of hydraulic chucks for rough and finish milling with strong torque power and economical price. If you use the ChongDe’s hydraulic chuck, you no longer need to use products such as ER system, milling chuck, shrinking fit chuck, and end-mill holder. This is because the hydraulic chuck offers a better solution than these products.
Features:
1. Vibration Damping Effect
- The hydraulic chuck have oil chamber and it generate a “Vibration Damping Effect” effectively. Only the hydraulic chuck in the tool holding system has a “Vibration Damping Effect”.
2. Easy Tool Change
3. High run-out Accuracy
4. Fine-balanced 2.5 25000rpm for high speed machining
5. Vacuum Brazing System and Vacuum Filling System
Our advantages
1. Run-out accuracy: below 0.003mm at 3 x D
2. Balancing grade: G2.5 25000rpm
3. Axial length adjustment up to 10mm
4. T-wrench is provided free of charge
5. For ATC (Automatic tool change)
6. Taper tolerance: ≤AT3
7. Flexible clamping range with reduction sleeve
8. Tool shank tolerance should be h6
9. AD (center through) coolant system
ITEM CODE | D1 [mm] | D2 [mm] | D3 [mm] | D4 [mm] | X [mm] | L1 [mm] | L1 [mm] | L1 [mm] | L1 [mm] | G | Weight [kg] |
BT30-HC6-65 | 6 | 20 | 46 | 22 | 25 | 65 | 40 | 10 | 33 | M5 | 0.7 |
BT30-HC8-65 | 8 | 28 | 46 | 24 | 25 | 65 | 40 | 10 | 33 | M6*1 | 0.7 |
BT30-HC10-65 | 10 | 30 | 46 | 26 | 24 | 65 | 41 | 10 | 34 | M8*1 | 0.7 |
BT30-HC12-65 | 12 | 32 | 46 | 28 | 19 | 65 | 46 | 10 | 34 | M8*1 | 0.7 |
BT30-HC14-65 | 14 | 34 | 46 | 30 | 19 | 65 | 49 | 10 | 34 | M8*1 | 0.7 |
BT30-HC16-90 | 16 | 38 | 46 | 34 | 41 | 90 | 49 | 10 | 50 | M8*1 | 0.9 |
BT30-HC18-90 | 18 | 40 | 46 | 36 | 41 | 90 | 49 | 10 | 50 | M8*1 | 0.9 |
BT30-HC20-90 | 20 | 42 | 46 | 38 | 39 | 90 | 51 | 10 | 50 | M10*1 | 0.9 |